BREATHABLE SEALER
THIS SEALER LEAVES YOUR WALLS BREATHABLE
Concrete Walls Sealer
ℹ️ DESCRIPTION ℹ️
- Concrete Walls Sealer | VB-1 is manufactured based on siloxanes to protect mineral, porous substrates of concrete walls against water.
- It reduces the absorbability of the substrate – ensuring protection against precipitation water and penetration of harmful chemical compounds dissolved in water into the material structure.
- Concrete Walls Sealer | VB-1 increases the resistance of the impregnated substrate to dirt, efflorescence and the development of biological contamination.
- Alkali-resistant, durable – UV-resistant, solvent-free. It does not degrade the properties of the protected material in terms of gas and water vapour diffusion the pores remain open.
Step-by-Step Guide
Concrete Walls Sealer | VB-1 is a ready-to-use product. DO NOT DILUTE.
- It may be applied using a low-pressure spray, brush or roller.
2. Subsequent applications MUST be “wet on wet” within 10 minutes of the previous application. Do not allow the substrate to dry between applications.
3. Depending on the properties and porosity of the protected substrate, the above procedure should be repeated 2 or 3 times.
4. During work and immediately after completion, the freshly impregnated surfaces should be protected against direct sunlight and precipitation for a minimum of 5 hours.
THE RESULT
Application area:
All substrates make of concrete
Concrete Walls Sealer | VB-1 is used inside and outside buildings on old and new surfaces.
PRIOR APPLICATION:
- Before sealing, the surface should be cleaned of dirt, dust, patina, loose elements, salt efflorescence and residues of paint coats.
- Any adjacent substrate not being treated with the product must be protected.
- Never apply to the wet substrate. The product can be used on the slightly damp substrate; nonetheless, please ensure that the bricks substrate to be treated is as dry as possible.
- The substrate should not be displayed in direct sunlight and rainfall at the time of application.
Note. Concrete Walls Sealer | VB-1 impregnation should not be performed on surfaces with high salinity, as this may intensify the crystallization process of construction salts and the destruction of the substrate material.
Comments and recommendations:
- Do not allow the applied product Concrete Walls Sealer | VB-1 to dry between applications.
- Do not apply during rain or frost and when surface and air temperature is < 5°C and > 30°C.
- All surfaces must be treated to saturation in 1-3 “wet on wet” applied, to ensure 100% product efficacy. This varies with the substrate, and treating a small trial area is recommended to calculate true consumption.
This information constitutes the basic guidelines for the use of the product. It does not release from the obligation to perform work following the principles of the art of the construction, conservation guidelines and health and safety regulations.
Do not apply during rain or frost and when surface and air temperature is < 5°C and > 30°C.
Before application, we recommend testing the product on a small, unexposed area.
⚠️ WARNINGS ⚠️
KEEP OUT OF REACH OF CHILDREN & PETS. ATTENTION CAUSTIC PRODUCT
The product contains: 2-methyl-2H-isothiazol-3-one
Concrete Walls Sealer| VB-1 – Technical specifications:
- Product density: approx. 1.0 kg / dm³
- PH: approx. 7
- Odour: Neutral
- Colour: milky white, colourless after drying, transparent Resistance to rain: after 5-6 hours
- Water absorption coefficient: Wd <0.1 kg / m2 x h1 / 2 or <7.5% acc. PN-EN 1504-2 / EN 13580 /
- Water vapor diffusion resistance: Sd = 0.0 [m]
- Alkali resistance – measured with water absorption according to PN-EN 1504-2 / EN 13580 <10%
- Penetration depth:> 5 mm, measured according to EN 14630
- Drying rate factor class 2 to 1 / depending on the degree of absorption/water absorption
- substrate, measured according to EN 13579
- Coverage: 1 L covers approx. 5-11 m²
- Application temperature: + 5 °C to + 30 °C
Available packaging: 1L/5L bottle
Expiry date: Up to 36 months of storage at temperatures >+ 5°C to < 30°C in original unopened manufacturer’s packaging. Water-based product = it freezes at temperatures < 0°C.
Please do not hesitate to contact us if you have any additional questions about Colour Enhancing Concrete Walls Sealer | Sealer VB-1.
Neville –
Had many old dusty concrete walls that were a real nuisance, as soon as you swept it, it needed sweeping again!
Sloshed on some VB-1 Sealer, spreading it with a soft roller, left it for 5 minutes, and then applied a second coat. When that had dried we were left with a dustless floor with a beautiful subtle sheen to it!
Our garage is now ready for a new lease of life…. and no more dust!
Paul –
It does exactly what it says on the tin
Rocco –
Goes on very easily.
Within 24 hours, clearly well waterproofed
Tessie Briffa –
We needed to seal concrete floors before laying laminate flooring. Really easy to use and did the job as well.