Application area:

• Natural stone surfaces, such as slate, terracotta, York stone, quarry tiles, sandstone, limestone, concrete
• It can be used indoors and outdoors
• For old and new surfaces.

PRIOR APPLICATION:

1. Before application, the surface should be cleaned of dirt, dust, patina, loose elements, salt efflorescence and residues of paint coats.
2. Any adjacent surfaces not being treated with the product must be protected.
3. Never apply to wet surfaces. The product can be used on slightly damp surfaces; nonetheless, please ensure that the surface to be treated is as dry as possible.
4. At the time of application, surface should not be displayed in direct sunlight and rainfalls.

Note.  Impregnation should not be performed on surfaces with high salinity, as this may lead to intensification of the crystallization process of construction salts and destruction of the substrate material.

Concrete Floor Sealer

Comments and recommendations:

• Do not allow the applied product to dry between applications.
• Do not apply during rain or frost and when surface and air temperature is < 5°C and > 30°C.
• All surfaces must be treated to saturation in 1-3 applications “wet on wet” applied, to ensure 100% product efficacy. This varies with substrate, and treating a small trial area is recommended to calculate true consumption

This information constitutes the basic guidelines for the use of the product and does not release from the obligation to perform work in accordance with the principles of art of the construction, conservation guidelines and health and safety regulations.

Before application, we recommend testing the product on a small, unexposed area.

⚠️ WARNINGS ⚠️

KEEP OUT OF REACH OF CHILDREN & PETS. ATTENTION CAUSTIC PRODUCT

The product contains: 2-methyl-2H-isothiazol-3-one

Concrete Floor Sealer – Technical specifications:

• Product density: approx. 1.0 kg / dm³ pH value: approx. 7
• Odor: neutral
• Color: milky white, colorless after drying, transparent Resistance to rain: after 5-6 hours
• Water absorption coefficient: Wd <0.1 kg / m2 x h1 / 2 or <7.5% acc. PN-EN 1504-2 / EN 13580 / Vapor diffusion resistance
• water: Sd = 0.0 [m]
• Alkali resistance – measured with water absorption according to PN-EN 1504-2 / EN 13580 <10%
• Penetration depth:> 5 mm, measured according to EN 14630
• Drying rate coefficient, class 2 to 1 / depending on the degree of absorbency of the substrate,
• measured according to EN 13579
• coverage: 1L covers approx. 5-11 m²