Sealers

Limestone Cleaning Malta

Limestone cleaning 2

The use of improper limestone cleaning methods can harm your tiles. After installation, you should start caring for your limestone. The most crucial step after installation is sealing your limestone with a penetrating impregnating sealer to ensure it stays in excellent shape.

It would be best to study a little bit about limestone to comprehend why you need to properly clean and maintain the walls and floors made of stone.

Limestone requires more attention when cleaning and maintaining because it is softer and more porous than other stones like marble and granite. Calcium carbonate, a chemical component found primarily on limestone, is a sedimentary rock easily harmed by acids and solutions containing acids.

For your Limestone tiles, you should not use certain types of Limestone sealers; this is crucial (vinegar or citrus juice, for example). An acidic material might leave a dull patch or an etch mark on your stone that you cannot remove without the aid of resurfacing tools as soon as it comes into contact with it.

Limestone Cleaning

Limestone Cleaning

Ensuring your limestone flooring is clear of sand and dust is intelligent. Limestone surfaces are ground and abrasively affected by debris left there. These will accumulate and chip the stone’s surface, leaving it open further harm.

Introduce barrier matting at entrances to prevent abrasive debris from shoes from being transmitted onto the stone, and routinely vacuum or sweep to reduce the effect of debris causing a grinding effect.

Always ensure the brush attachment is attached when vacuuming, taking care not to damage your limestone.

You could use lukewarm water could be used for cleaning limestone flooring regularly. Utilize a microfiber mop with very little water that has been well wrung off. Make sure to dry your limestone after you’re done since too much water can seep into it. When mopping, use only minimal pressure. Use alkaline or pH-neutral cleaner if you need to clean your stone thoroughly.

Limestone cleaning 2

Do's and Don'ts of Limestone Cleaning

Limestone Cleaning: Dos

  1. Clean up spills ASAP by smudging them (avoid letting a stain set in!
  2. Since limestone is a natural stone, seal the floors.
  3. each doorway with a mat
  4. To clean floors, use a microfiber mop.
  5. Routine floor cleaning

Limestone Cleaning: Don'ts

  1. Avoid cleaning your limestone with vinegar, ammonia, or bleach.
  2. Never use acidic cleaning products.
  3. Should not use a scouring pad or an abrasive cleaner.

Limestone Cleaning: Limestone Sealer for perfect caring

Although no Limestone sealer is everlasting, if the floor has been properly sealed and maintained, it should remain protected for many years. Penetrating sealer produced created especially for stone surfaces has a 15-year lifespan.

Sealing limestone tiles with a deep penetrating sealer would be best to avoid stains and minimize soiling.

After sealing, for cleaning, we should use only pH-neutral detergents.

When cleaned improperly, limestone can become porous again by damaging the seal and the stone itself.

If an appropriate Limestone cleaning and maintenance cycle is not established during installation, limestone might be challenging to maintain.

Since it is typically not polished, scratching is less of a problem than it is with marble, but even a honed surface will start to lose its appeal if suitable barrier matting is not introduced.

Limestone cleaning 3

Get professional limestone cleaning and sealing help from KIBITEC. Get in touch with KIBITEC and contact us for a free quotation.

Leave a Reply

Your email address will not be published. Required fields are marked *