PAVING STONES AND CONCRETE SEALER | SK-2

ℹ️ DESCRIPTION ℹ️

PAVING STONES AND CONCRETE SEALER | SK-2 impregnation for paving stones and concrete. “Wet concrete effect”, which does not make it slippery.

SEALER SK-2 impregnation is a specialised substance for paving stones and concrete, based on the resin in a dearomatized organic solvent. Its particles deeply penetrate the mineral surface, creating an invisible but effective and durable protective barrier with the surface of the paving stone.

🧹 APPLICATION AREA 🧹

The substance is dedicated to the impregnation of paving stones and other
concrete surfaces.

A professional substance that gives the paving stones a distinctive, vivid
colour and protects them against dirt. It strengthens the colour of
cobblestones, eliminating the effect of faded cobblestones.

The impregnation creates a protective layer on the surface that
permanently protects both new and old concrete products against the
the negative influence of weather conditions.
It prevents water and dust from penetrating the substrate.
It protects against stains.
The surface of the paving stones becomes easy to clean.
The created layer prevents the formation of fungi, lichens and mould.

👷‍♂️ APPLICATION INSTRUCTION 👷‍♂️

PAVING STONES AND CONCRETE SEALER | SK-2 impregnation is produced in a ready-to-use form.

Do not dilute. The substrate should be dry, compact, not frozen, and thoroughly cleaned of dust, dirt, oils, fats and waxes. Remove unstable parts of the surface that could affect the uneven distribution of the impregnation.
Before using the product, mix it vigorously.

Before starting work, tests should be carried out in a small area to check the effect of the impregnation on the substrate.

Spread the impregnation evenly with a roller or a brush and leave it for a few minutes to absorb the required amount of the substance into the substrate. Applying the second layer in a short time is recommended using the “wet on wet” method.

Leave it to dry for about 3 hours.

During this time, the impregnated surfaces should be protected against rainfall and mechanical damage.
Only pedestrian traffic is allowed, not earlier than 24 hours after the completion of the impregnation.
The time of full hardening of the impregnation is up to 72 hours. at an ambient temperature of + 20 ° C and a relative humidity of 65%.

Paving stones and other concrete surfaces can be impregnated after complete curing, i.e. at least 28 days from production.

Efficiency: Depending on the absorbency of paving stones or concrete, 1 litre of the PAVING STONES AND CONCRETE SEALER | SK-2 preparation can be impregnated from 5 to 10 m² – with a single impregnation.

🙌 RECOMMENDATIONS 🙌

Do not impregnate surfaces with visible salinity (blooms), as it may intensify the process of crystallization of building salts and destroy the base material.

⚠️ WARNINGS ⚠️

ℹ️ PAVING STONES AND CONCRETE SEALER | SK-2 – TECHNICAL SPECIFICATIONS ℹ️

A brush or a roller
Drying time: depending on temperature and humidity – 2-3 hours.
Application temperature: from +5 to + 30 ° C
Colour and form: colourless liquid
Density: approx. 0.9 g / cm³
Flash point: approx. 51oC

Fragrance: characteristic of de-aromatized solvents
Water absorption coefficient: Wd <0.1 kg / m2 x h1 / 2 or <7.5% acc. PN-EN 1504-2 / EN 13580 /
Water vapor diffusion resistance: Sd = 0.0 [m]
Alkali resistance – measured with water absorption according to PN-EN 1504-2 / EN 13580 <10%

Penetration depth:> 2 mm, measured according to EN 14630.
Drying rate coefficient class 2 to 1 / depending on the degree of absorbency and water absorption of the substrate /,
measured according to EN 13579.

Expiry date: Use the substance within 36 months from the production date shown on the packaging.
Packaging: 1 litre and 5-litre cans

Please do not hesitate to contact us if you have any additional questions about PAVERS AND CONCRETE SEALER | SEALER SK-2