Topciment Primacem ABS

Adhesion promoter: absorbent surfaces.

Properties

Adhesion promoter for absorbent substrates.
Applied with a roller or brush in one coat.
Water-based; non-flammable.
No plasticizers, solvents, ammonia, or emulsifiers.
Product supplied ready for use.

Application

The substrate should be dry, clean, firm, and free of grease and oil. It is necessary to wait for at least 30 minutes and no more than 24 hours to apply the first layer of microcement.

Technical data

Acrylic dispersion water-based
White milky liquid
Solids: 10,7 %
PH: between 8 and 9
Viscosity 10-11 s (Ford Cup 4)
Density at 20ºC: 1.01 ± 0.01 g/ml
Application temperature: from 5ºC to 35ºC
Dries to touch in 30 minutes

Special precautions

If the product comes into contact with the eyes, wash with plenty of water for 15 minutes. In the event of contact with skin, wash with soap and water.
Do not ingest. If swallowed, do not induce vomiting and seek medical assistance immediately.
To prevent the product from drying or thickening, close the lid after each use.

This product is not toxic, dangerous, or flammable under normal conditions of handling. It does not contain any harmful substances that under current regulations call for any additional measures in terms of its labeling. Keep out of the reach of children.

Packaging

Topciment Primacem ABS is available in containers of 5 liters.

Storage Conditions

The product should be stored in its closed original packaging, protected from weather conditions at temperatures between 10ºC and 30°C in a dry and well-ventilated place, away from direct heat and sunlight. Shelf life is 1 year from the date of production if stored in well-preserved conditions.

Check out our previous projects here
Check out our microcement collection here