ORDER NOW, PAY CASH ON DELIVERY

Oil Stain Remover for Floors | OL-1

Oil Stain Remover for Floors | OL-1 is a deep penetrating formula that lifts stains from porous flooring surfaces.

How to Use

1. Prepare the surface

Clean the surface and remove debris, then shake vigorously for 30 seconds.

2. Open and pour-on

Apply Oil Stain Remover for Floors | OL-1 generously and evenly over the surface. Protect and cover the non-cleanable areas.

3. Brush the surface

Vigorously brush with a paintbrush/brush for 5/10 seconds using a circular motion.

4. Clean and rinse

Remove the compound using a tissue paper/kitchen towel. Then rinse with water.

5. Result

If the finished result is unsatisfactory, repeat the application process described above.

ORDER NOW, PAY CASH ON DELIVERY

Oil Stain Remover for Floors | OL-1

Unlike other chemical removers that use harmful chemicals to attack stains, Oil Stain Remover for Floors | OL-1 enables you to handle these problems safely and efficiently.

? Application area ?

Parking lots, garages, driveways, sidewalks.

✅ paving stone

✅  concrete

✅ terrazzo

✅ granite

✅ marble

✅ travertine

✅ tiles

✅ clinker

✅ terracotta

? Step-by-Step Application ?

1. Shake well before use.
2. Protect non-cleanable areas by using oil-resistant material covers.
3. Apply the Oil Stain Remover for Floors | OL-1 with a soft paintbrush, brush, etc., on the surface to be cleaned.
4. After application, the applied surface should be vigorously brushed with a paintbrush or brush for 5-10 seconds using a circular motion.
5. Leave the preparation on the surface for about 2-3 minutes, do not let it dry out and brush the surface vigorously again.
6. After 2-3 minutes, remove the reacted preparation and dirt with absorbent material.
7. If the finished result is not satisfactory, repeat the product application process as described above 2-3 times
8. After completion of work, rinse the cleaned areas thoroughly with water.

? Recommendations ?

Before application, testing the product on a small non-exposed area is recommended.

DUE TO THE NATURE OF THE PRODUCT, BEFORE OPENING THE PACKAGE, SHAKE IT SEVERAL TIMES.

• The preparation is manufactured in a ready-to-use version. Do not dilute.
• The OL preparation is not allowed to come into contact with materials which are not alkali-resistant.
• It causes skin and eye irritation; prolonged contact may cause damage to the eyes/skin.

Do not apply in case of rain or frost and when the surface and air temperature is <5 ° C and> 30 ° C.

This information constitutes the basic guidelines for the use of the product. It does not exempt you from the obligation to carry out works according to the principles of the art of construction, conservation guidelines and health and safety regulations.

Warnings:

KEEP OUT OF REACH OF CHILDREN AND PETS. ATTENTION CAUSTIC PRODUCT

ℹ️ Oil Stain Remover for Floors | OL-1 – Technical specifications ℹ️

The product contains toluene and potassium hydroxide.

Product density: approx. 1 kg / dm³aqueous and colourless solution
pH: ca. 13
coverage: approx. 0.1-0.3 L / per 1 m2
a characteristic scent typical of solvents

Packaging available: 1L tank

Expiry date: up to 36 months of storage at temperatures from> + 5 ° C to <30 ° C in the original unopened manufacturer’s packaging. Water-based product = freezes at temperatures <0 ° C.

Check out our previous projects here
Check out our cleaners collection here

Please do not hesitate to contact us if you have any additional questions about Oil Stain Remover for Floors | OL-1